40005995Eng.qxd 24/07/2009 12:19 Page 17
Operation
1.Open the door and load the drum with laundry. Ensure that garments do not hinder closure of the door.
2.Gently close the door pushing it slowly until you hear the door 'click' shut.
3.Turn the Programme Selector dial to select the required drying programme (see Programme Guide).
4.If drying synthetics, acrylics or delicate items,
press the 
button to reduce the heat level.
The light next to the push button will light up when the machine is in low heat setting. To deselect in the first few minutes of the
programme, press the 
button, after this time reset the machine to change the setting.
5.Press the 
button. The dryer will start automatically and the DRY indicator will be continuously lit.
6.If the door is opened during the programme to check the laundry, it is necessary to press
to recommence drying after the door has been closed.
7.When the cycle is nearing completion the machine will enter the cool down phase, the clothes will be tumbled in cool air allowing the load to cool down.
8.When the programme is complete the END indicator will light.
9.Following the completion of the cycle the drum will rotate intermittently to minimize creasing. This will continue until the machine is switched OFF or the door is opened.
WARNING!
The drum, door and load may be very hot.
17
