Cleaner description
12 |
| 1 |
|
|
|
|
| |
|
| 2 |
|
|
|
|
|
|
|
| 3 |
|
|
| 2 |
|
|
|
|
|
|
| 18 | |||
|
|
|
|
|
| |||
|
| 4 |
|
|
|
|
| |
13 |
|
| 5 | 4 | 13 | |||
| ||||||||
|
|
|
|
|
|
| ||
|
| 6 | 2 | 17 | ||||
|
|
|
|
|
| |||
|
| 7 | 14 |
|
|
| ||
|
| 15 |
|
|
| |||
|
| 8 |
|
| 16 | |||
|
| 9 |
|
|
| |||
|
|
|
| |||||
|
| 10 |
|
|
|
| ||
12 | 11 | |
8 | ||
|
12The assembled cleaner will look like the drawing.
1.Handle
2.Cord hooks: wrap cord around hooks for storage. The top hook can be rotated right or left for easy cord release.
3.Hose
4.ON/OFF Switch: located on left rear corner of cleaner body.
5.Carrying handle
6.Bag door
7.Stair cleaning handle: located on lower edge of bag door.
8.Handle release lever: step on lever to lower to operating or low positions.
9.Headlight
10.Nozzle control knob: slide knob to correct setting for height of carpet being cleaned.
11.Furniture guard: helps prevent cleaner from marking furniture.
12.Edge groomers
13.Wands
14.Final exhaust filter
15.Dusting brush
16.Crevice tool
17.Furniture nozzle
18.Hose hook
How to use
Operate cleaner only at voltage specified on data plate on bottom of cleaner.
WARNING: Electric shock could occur if used outdoors or on wet surfaces
G rounding instru c t i o n s
This appliance must be grounded. If
13 it should malfunction or breakdown, grounding provides a path of least
resistance for electrical current to reduce the risk of electric shock. This appliance is equipped with a cord having an equip- ment - grounding conductor (C) and grounding plug (A). The plug must be plugged into an appropriate outlet (B) that is properly installed and grounded in accordance with all local codes and ordi- nances .
DANGER –
Improper connection of the equipment- grounding conductor can result in the risk of electric shock. Check with a qualified
13
A
C B
electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provid- ed with the appliance - if it will not fit the outlet have a proper outlet installed by a qualified electrician. This appliance is for use on a nominal 120 volt circuit and has a grounding plug that looks like the plug illustrated in sketch (A).
A temporary adapter (D) may be
14 used to connect this plug to a
14
D
F
G
E
should be used only until a properly grounded outlet (B) can be installed by a qualified electrician. The green colored rigid ear, lug, or the like (F) extending from the adapter must be connected to a per- manent ground (G) such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.
Note: In Canada, the use of a tempo- rary adapter is not permitted by the Canadian Electrical Code.
4
