INTRODUCTION
SPEAKERS
A S S E M B LY STEP 1
INTRODUCTION
IMPORTANT PRECAUTIONS
ASSEMBLY
BEFORE YOU BEGIN
FAN
GRIP PULSE
CONSOLE MAST
TOP CAP
PIVOTING FOOT PAD 
PEDAL ARM
REAR STABILIZER CAPS
CONSOLE |
UPPER HANDLEBAR |
HANDLEBAR COVER SET |
CONSOLE MAST BOOT |
MAIN FRAME |
LOWER HANDLEBAR
CUSTOMSTRIDE™ ADJUSTMENT KNOB
ELBOW COVER SET
FRONT STABILIZER TUBE
PEDAL ARM COVER
LOWER LINK ARM
ROLLER WHEEL COVER
CONSOLE MAST
CONSOLE MAST BOOT
TOP CAP
| WAVY WASHER (D) |
| FLAT WASHER (C) |
| SPRING WASHER (B) |
| BOLT (A) |
CONSOLE WIRE | MAIN FRAME |
IMPORTANT PRECAUTIONS
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
CONDITIONING TROUBLESHOOTING GUIDELINES & MAINTENANCE
TOOLS INCLUDED
c5mm L Wrench
c5mm T Wrench
cPhillips Screw Driver
c13/17mm Flat Wrench
PARTS INCLUDED
c 1 Console | c 1 Console Mast Boot | ||
c 1 Console Mast | c 1 Top Cap | ||
c 2 Upper Handlebars | c 2 Pedal Arms | ||
c 2 | Lower Handlebars | c 2 | Roller Wheel Covers |
c 2 | Lower Link Arms | c 6 | Hardware Bags |
c 2 | Pivoting Foot Pads | c 1 | Power Supply |
c 2 | Elbow Covers Sets | c 1 | Audio Adaptor Cable |
c2 Handlebar Cover Sets
c2
c2 Rear Stabilizer Caps
c1 Stabilizer Bar
A)Open HARDWARE BAG FOR STEP 1.
B)Slide the CONSOLE MAST BOOT followed by the TOP CAP over the CONSOLE MAST.
C)Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
D)Attach the sides of the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4 FLAT WASHERS (C).
E)Attach the front of the CONSOLE MAST to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B) and 2 WAVY WASHERS (D).
F)Slide CONSOLE MAST BOOT down to seal the console mast hole.
HARDWARE BAG FOR STEP 1 CONTENTS :
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
LIMITED
WARRANTY
6
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
BOLT (A) | SPRING WASHER (B) | FLAT WASHER (C) | WAVY WASHER (D) |
15 mm | Qty: 6 | 20 mm | 17 mm |
Qty: 6 |
| Qty: 4 | Qty: 2 |
|
|
| angle view |
7
LIMITED WARRANTY
6/13/07 1:26:03 PM |
