Horizon Fitness CX-66 manual YOU’RE Finished

INTRODUCTION IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

ELLIPTICAL

OPERATION

CONDITIONING TROUBLESHOOTING LIMITED

GUIDELINES & MAINTENANCE WARRANTY

14

A S S E M B LY STEP 8

SCREWS (Q)

ELBOW JOINT

INSIDE ELBOW COVER

OUTSIDE ELBOW COVER

A)Open HARDWARE BAG FOR STEP 8.

B)Attach the OUTSIDE ELBOW COVER to the ELBOW JOINT using 1 SCREW (Q).

C)Snap the INSIDE ELBOW COVER onto the OUTSIDE ELBOW COVER. Note the position of the snap tabs before snapping into position.

D)Attach the INSIDE ELBOW COVER to the ELBOW JOINT using 1 SCREW (Q).

E)Repeat on other side.

HARDWARE BAG FOR STEP 8 CONTENTS :

SCREW (Q) 15 mm Qty: 4

A S S E M B LY STEP 9
CONSOLE	CONSOLE WIRES
	PRE-ATTACHED
	SCREWS

NOTE: There is NO hardware bag for this step. All hardware is pre-installed.

A)Attach the CONSOLE MAST wires to the CONSOLE wires .

B)Carefully tuck the CONSOLE MAST wires into the CONSOLE MAST before attaching the CONSOLE.

C)Attach CONSOLE to the CONSOLE MAST using the 4 PRE-ATTACHED SCREWS (screws will have to be removed from the console first).

DO NOT PINCH WIRES!

Connect AC ADAPTOR to the AC ADAPTOR INPUT, located at front of the main frame. Connect ADAPTOR to a power outlet. Locate the ON / OFF switch on the back of the CONSOLE. Flip the switch to the ON position. After a “beep”, the CONSOLE will turn on.

YOU’RE FINISHED!

15

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

ELLIPTICAL OPERATION

LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES

CX-66_Elliptical_Rev.1.6.indd 14-15 6/13/07 1:26:49 PM