|
|
|
|
| INTRODUCTION |
|
| |
|
|
|
SPEAKERS
FAN
CONSOLE
UPPER HANDLEBAR
A S S E M B LY STEP 1
INTRODUCTION
IMPORTANT |
PRECAUTIONS |
|
ASSEMBLY |
|
|
YOU |
BEFORE |
BEGIN |
|
GRIP PULSE
CONSOLE MAST
CONSOLE MAST BOOT
TOP CAP
PEDAL ARM COVER
PIVOTING FOOT PAD
PEDAL ARM
GUIDERAIL CAPS
HANDLEBAR COVER SET
LOWER HANDLEBAR
ELBOW COVER SET
CUSTOMSTRIDE™ ADJUSTMENT KNOB
FRONT STABILIZER TUBE
LOWER LINK ARM
ROLLER WHEEL COVER
CONSOLE MAST
CONSOLE MAST BOOT
TOP CAP
ARC WASHER (D) |
FLAT WASHER (C) |
SPRING WASHER (B) |
BOLT (A) |
CONSOLE WIRE |
MAIN FRAME |
IMPORTANT PRECAUTIONS
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION |
|
|
GUIDELINES |
CONDITIONING |
&MAINTENANCE |
TROUBLESHOOTING |
TOOLS INCLUDED
c5mm L Wrench
c5mm T Wrench
cPhillips Screw Driver
c13/17mm Flat Wrench
PARTS INCLUDED
c 1 Console | c 1 Console Mast Boot | ||
c 1 Console Mast | c 1 Top Cap | ||
c 2 Upper Handlebars | c 2 Pedal Arms | ||
c 2 Lower Handlebars | c 2 Pedal Arm Covers | ||
c 2 | Lower Link Arms | c 2 | Roller Wheel Covers |
c 2 | Pivoting Foot Pads | c 6 | Hardware Bags |
c 2 | Elbow Covers Sets | c 1 | Power Supply |
c 2 | Handlebar Cover Sets | c 1 | Audio Adaptor Cable |
c2
c2 Guiderail Caps
A)Open HARDWARE BAG FOR STEP 1.
B)Slide the CONSOLE MAST BOOT followed by the TOP CAP over the CONSOLE MAST.
C)Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
D)Attach the sides of the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4 FLAT WASHERS (C).
E)Attach the front of the CONSOLE MAST to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B) and 2 ARC WASHERS (D).
F)Slide CONSOLE MAST BOOT down to seal the console mast hole.
HARDWARE BAG FOR STEP 1 CONTENTS :
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING MAINTENANCE GUIDELINES
| LIMITED |
|
|
| WARRANTY |
| |
|
|
| |
|
|
|
|
If you have questions or if there are any missing parts, contact Customer Tech Support. If any warning decals become worn, damaged, or missing, they should be replaced.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
BOLT (A) | SPRING WASHER (B) | FLAT WASHER (C) | ARC WASHER (D) |
15 mm | Qty: 6 | 20 mm | 17 mm |
Qty: 6 |
| Qty: 4 | Qty: 2 |
LIMITED WARRANTY &
6/16/08 2:40:06 PM |
