BEFORE
YOU BEGIN

16

INTRODUCTION IMPORTANT
PRECAUTIONS ASSEMBLY BEFORE
YOU BEGIN ELLIPTICAL
OPERATION LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE
YOU BEGIN ASSEMBLY

17

INTRODUCTION
IMPORTANT
PRECAUTIONS
ELLIPTICAL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY

ASSEMBLY STEP 9

PRE-ATTACHED SCREWS
CONSOLE
CONSOLE MAST
CONSOLE WIRES
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.
A) Attach the CONSOLE MAST wires to the CONSOLE wires.
B) Carefully tuck the CONSOLE MAST wires into the CONSOLE MAST before attaching the CONSOLE.
C) Attach CONSOLE to the CONSOLE MAST using the 4 PRE-ATTACHED SCREWS (screws will have to be removed
from the console first).
DO NOT PINCH WIRES!
D) Insert RUBBER PLUG into iPod® DOCKING STATION.

YOU’RE FINISHED!

BOLTS (G)
iPod®Docking Station Rubber Plug
iPod®Docking Station
E900_E1200_Rev.2.5.indd 16-17 6/22/07 4:15:13 PM