INTRODUCTION IMPORTANT PRECAUTIONS
ASSEMBLY
CONSOLE
GRIP PULSE
WATER BOTTLE HOLDER CONSOLE MAST
TOP COVER
UPPER HANDLEBAR
HANDLE BAR COVER
MAIN FRAME
LOWER HANDLEBAR
A S S E M B LY STEP 1
HARDWARE BAG FOR STEP 1 CONTENTS :
BOLT (A) | SPRING WASHER (B) | FLAT WASHER (C) | SCREW (M) |
20 mm | 18 mm | 20 mm | Qty: 4 |
Qty: 2 | Qty: 2 | Qty: 2 |
|
MAIN FRAME |
FRONT STABILIZER COVERS |
SCREW (M) |
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
| LOWER LINK ARM |
PIVOTING FOOT PAD | ELBOW COVER |
| |
| FRONT STABILIZER COVER |
PEDAL ARM |
|
WHEEL COVER |
|
| FRONT STABILIZER TUBE |
REAR STABILIZER | BOLT (A) |
SPRING WASHER (B) |
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
CONDITIONING TROUBLESHOOTING GUIDELINES & MAINTENANCE
TOOLS INCLUDED
c5mm Allen Wrench
c6mm Allen Wrench
cPhillips Screw Driver
c13/15mm Flat Wrench
PARTS INCLUDED
c | 1 | Console | c | 2 | Elbow Cover Sets |
c | 1 | Console Mast | c | 2 | Front Stabilizer Covers |
c1 Front Stabilizer Tube c 2 Handle Bar Cover Sets
c 2 Upper Handlebars | c 1 Water Bottle Holder |
c2 Lower Handlebars
c2 Lower Link / Pivoting Foot Pads
c2 Top Covers
c1 HORIZON FITNESS
c4 Hardware Bags
FLAT WASHER (C) |
A)Open HARDWARE BAG FOR STEP 1.
B)Attach the FRONT STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B) and 2 FLAT WASHERS (C).
C)Attach FRONT STABILIZER COVERS using 4 SCREWS (M).
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
HORIZON WARRANTY
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
HORIZON WARRANTY
3/29/07 11:55:34 AM |
