Horizon Fitness LS780T manual S E M B Ly, Unpacking, Tools Included, Parts Included

INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
YOU
BEFORE
BEGIN
TREADMILL OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
&MAINTENANCE
WARRANTY
LIMITED
	

A S S E M B LY

IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!

WARNING

During the assembly process of the treadmill there are several areas that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that are not tightened and will seem loose and may cause irritating noises. There should be no side-to-side play in the console masts or any forward and back play in the console assembly or handlebars. If there is any play in these areas, the treadmill has not been properly assembled. To prevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.

UNPACKING

Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side. Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled and in the upright folded position, with the lock latch secure. Unpack the unit where it will be used. The enclosed treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never grab hold of any portion of the incline frame and attempt to lift or move the treadmill. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!

Before proceeding, find your treadmill’s serial number and model name located to the left of the on/off power switch and power cord and enter it in the space provided below.

enter your serial number and model name in the boxes below:

SERIAL NUMBER:

MODEL NAME:

*Refer to the serial number and model name when calling for service.

*Also enter this serial number on your Warranty Card.

READING RACK / MP3 STORAGE	CONSOLE
	TOUCH PAD PANEL
WATER BOTTLE HOLDER
GRIP PULSE HANDRAILS
HANDLEBARS
ON/OFF SWITCH	SAFETY KEY PLACEMENT
CIRCUIT BREAKER	CONSOLE MAST
	MOTOR COVER
POWER CORD	FOOT LOCK LATCH
	RUNNING BELT / RUNNING DECK
	SIDE RAIL
	ROLLER END CAP
TRANSPORT WHEEL
AIR CELL	REAR ROLLER
	ADJUSTMENT BOLTS

TOOLS INCLUDED

5 mm T-wrench

6 mm T-wrench

10 mm L-wrench

PARTS INCLUDED

1 Safety Key

1 Console Assembly (located under treadmill deck)

1 Power Cord

4 Hardware Bags

2 Handlebars

2 Console Masts

1 Bottle of Silicone Lubricant

If you have questions or if there are any missing parts, contact Customer Tech Support.

Contact information is located on the back panel of this manual.

For a complete exploded diagram, visit us at www.horizonfitness.com

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES

LS780T_Rev.1.3.indd 6-7 6/2/08 4:40:19 PM