INTRODUCTION IMPORTANT PRECAUTIONS

ASSEMBLY

BEFORE YOU BEGIN

A S S E M B LY

IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!

WARNING

During the assembly process of the treadmill there are several areas that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that are not tightened and will seem loose and may cause irritating noises. There should be no side-to-side play in the console masts or any forward and back play in the console assembly or handlebars. If there is any play in these areas, the treadmill has not been properly assembled. To prevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.

UNPACKING

Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side. Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled and in the upright folded position, with the lock latch secure. Unpack the unit where it will be used. The enclosed treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never grab

READING RACK

MP3-IN JACK

WATER BOTTLE HOLDER

GRIP PULSE HANDRAILS

HEADPHONE JACK

SUPPORT BAR

HANDLEBARS

ON/OFF SWITCH

CIRCUIT BREAKER

POWER CORD

TRANSPORT WHEEL

AIR CELL

SPEAKERS

STORAGE AREA

CONSOLE MAST COVER

CONSOLE

FAN

SAFETY KEY PLACEMENT

CONSOLE MAST

MOTOR COVER

RUNNING BELT / RUNNING DECK

FOOT LOCK LATCH

SIDE RAIL

ROLLER END CAP

REAR ROLLER

ADJUSTMENT BOLTS

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

CONDITIONING GUIDELINES

hold of any portion of the incline frame and attempt to lift or move the treadmill. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!

Before proceeding, find your treadmill’s serial number and model name located under the deck on the frame crossbar and enter it in the space provided below.

TOOLS INCLUDED

Screwdriver 4mm L-wrench 17mm Flat Wrench 5 mm T-wrench

6 mm T-wrench

10 mm L-wrench

PARTS INCLUDED

TREADMILL OPERATION

CONDITIONING GUIDELINES

TROUBLESHOOTING & MAINTENANCE

enter your serial number and model name in the boxes below:

SERIAL NUMBER:

MODEL NAME:

1 Safety Key

1 Console Assembly (located under treadmill deck)

2 Console Mast Covers

1 Power Cord

6 Hardware Bags

2 Handlebars

2 Console Masts

1 Bottle of Silicone Lubricant

1 Support Bar

1 Audio Adaptor Cable

1 Chest Strap

TROUBLESHOOTING & MAINTENANCE

LIMITED

WARRANTY



*Refer to the serial number and model name when calling for service.

*Also enter this serial number on your Warranty Card.

If you have questions or if there are any missing parts, contact Customer Tech Support.

Contact information is located on the back panel of this manual.

For a complete exploded diagram, visit us at www.horizonfitness.com



LIMITED WARRANTY

T84_Treadmill_Rev.1.5.indd 6-7

8/6/07 1:03:57 PM

Page 4
Image 4
Horizon Fitness T84 manual S E M B Ly, Unpacking, Tools Included, Parts Included

T84 specifications

The Horizon Fitness T84 is a treadmill that embodies the ideal combination of performance, durability, and modern technology, appealing to both novice and seasoned fitness enthusiasts. Built to withstand the rigors of daily use, the T84 sets itself apart with its robust structure and advanced features, making it a valuable addition to any home gym.

One of the standout features of the T84 is its powerful 2.5 HP continuous duty motor, designed to deliver consistent performance no matter the workout intensity. This motor supports a top speed of 10 mph, accommodating everything from brisk walking to intense running sessions. The treadmill also offers an impressive incline range, reaching up to 10%, which allows users to enhance their fitness routine and simulate outdoor running conditions.

The T84 is designed with a spacious 20-inch by 55-inch running surface, providing ample room for users of varying heights and stride lengths. This feature, coupled with a well-cushioned deck, helps reduce the impact on joints, making workouts comfortable and less strenuous. This cushioning system is crucial for preventing injuries, especially during long training sessions.

In terms of technology, the Horizon Fitness T84 is equipped with a clear and easy-to-use console featuring a large LCD display. This display offers real-time feedback on key workout metrics such as time, distance, speed, calories burned, and heart rate. The treadmill is also compatible with Bluetooth, allowing users to connect their devices for fitness apps and music while working out.

The T84 treadmill includes a variety of workout programs tailored to different fitness levels and goals. Whether users are looking to lose weight, build endurance, or simply maintain a healthy lifestyle, the T84's built-in programs provide diverse options to keep workouts engaging and effective. Additionally, the device features quick keys for speed and incline adjustments, enabling users to customize their workouts seamlessly.

Safety features are also prioritized in the T84, with a safety key that immediately stops the machine if needed, as well as sturdy handrails for added stability. The treadmill’s foldable design is another highlight, making it easy to store and saving valuable space when not in use.

In summary, the Horizon Fitness T84 treadmill combines a sturdy design, powerful motor, advanced technology, and a variety of features tailored to enhance the workout experience. For individuals seeking a reliable and effective treadmill for their home fitness routine, the T84 is a commendable choice that promises both performance and comfort.