Hoshizaki DCM-751BAH(-OS), DCM-751BWH(-OS) instruction manual DCM-751BAH-OS, Icemaker, Fig

1. Icemaker

•Icemaker water supply inlet is 1/2" female pipe thread (FPT). A minimum of 1/4" nominal

ID copper water tubing or equivalent is required for the icemaker water supply line.

•An icemaker water supply line shut-off valve and drain valve should be installed.

•Storage bin and drip tray drain outlets are 3/4" FPT. A minimum of 3/4" nominal ID hard pipe or equivalent is required for the storage bin and drip tray drain lines.

Storage Bin

Drain Outlet

3/4" FPT

Drip Tray

Drain Outlet

3/4" FPT

Stand

Icemaker

Vent

Tube

Icemaker Water	Icemaker Water Supply
Supply Inlet	Line Shut-Off Valve
1/2" FPT

Minimum 1/4" Nominal ID

Copper Water Tubing

Icemaker Water Supply

Line Drain Valve

Separate piping to approved drain. Leave a 2-inch (5‑cm) vertical air gap between the end of each pipe and the drain.

Minimum 3/4" Nominal ID	2-inch (5-cm)
Hard Pipe
	air gap

Fig. 4 DCM-751BAH(-OS)

Floor Drain

18