Hoshizaki DT-400BAH-OS instruction manual E. Electrical Connection, See Fig

E. Electrical Connection

See Fig. 2

WARNING

The GREEN ground wire in the factory-installed power cord is connected to a screw on the bracket where the cord enters the machine. If it becomes necessary to remove or replace the power cord, be sure to connect the power cord’s ground wire to this screw upon reattachment.

•Electrical connections must be installed in accordance with applicable national, state, and local regulations.

•The icemaker requires an independent power supply. See the nameplate for proper voltage and breaker/fuse size.

•Usually an electrical permit and services of a licensed electrician are required.

•The maximum allowable voltage variation is ±10 percent of the nameplate rating.

Power Cord

Fig. 2

8