(g)Remove the Bin Control Bracket Extension from the accessory bag.
(h)Remove the Baffle from the Bin.
(i)Remove the two screws holding the Bulb Holder (C) to the Thermostat Bracket (E).
If a Hoshizaki Bin is being used:
(j)Remove the two screws holding the Bulb Holder (C) and the Thermostat Bulb Attachment together. Put aside the Bulb Holder (C); it is not needed with the Hoshizaki Bin.
(k)Use two of the screws to attach the Bin Control Bracket Extension to the Thermostat Bracket (E).
(l)Use the two 4 x 10 stainless steel screws in the accessory bag to attach the Thermostat Bulb Attachment to the Bin Control Bracket Extension. See Fig. 3b.
(m)Reinstall the Baffle in the Bin.
If a non-Hoshizaki Bin is being used:
(j)Use the two screws from (i) to attach the Bin Control Bracket Extension to the Thermostat Bracket (E).
(k)Use the two 4 x 10 stainless steel screws in the accessory bag to attach the Bulb Holder (C) (with attached Thermostat Bulb) to the Bin Control Bracket Extension. See Fig. 3c.
(l)Reinstall the Baffle in the Bin.
Fig. 3b | Fig. 3c |
11
