6)Level the icemaker/Storage Bin in both the
7)Place the panels in position.
5.INSTALLATION OF THE SECOND UNIT - See Figures 4 and 5
1)See “4. SET UP” for the lower unit installation.
2)Remove the Top Panel and the Top Insulation of the lower unit. The Top Panel and the Top Insulation of the lower unit are not required when installing the second icemaker.
3)Unpack the second icemaker (upper unit), and remove all shipping cartons, tape(s) and packing.
Fig. 4
4)Remove the panels of the second icemaker.
5)Stack the upper unit on the top of the lower unit.
6)Secure the upper unit to the lower unit by using the two Universal Braces and the four bolts provided.
7)Remove the Thermostat Bulb Attachment of the upper unit from the Thermostat Bracket.
8)Route the Bin Control Thermostat Capillary Tubing of the upper unit through the bottom hole of the upper unit and the Thermostat Bracket of the lower unit. Secure the Thermostat Bulb of the upper unit to the Thermostat Bulb Attachment of the lower unit with the Thermostat Bulb Attachment and the screws of the upper unit.
12