G. Startup
CAUTION
1.All parts are
2.If the unit is turned off, wait for at least 3 minutes before restarting the icemaker to prevent damage to the compressor.
1)Open the water supply line
2)Remove the front panel.
3)Move the control switch on the control box to the "ICE" position.
4)Let the icemaker run for 10 minutes, then move the control switch to the "OFF" position.
5)Open the door.
6)Disconnect the suction hose to drain the water. See Fig. 3.
7) | Reconnect the suction hose back in its correct position | Suction Hose |
| |
|
|
| ||
| after all of the water has drained. | Water Tank | Drain | |
|
|
|
| |
8) | Clean the storage bin. |
|
| Pan |
|
| |||
9) | Move the control switch to the "ICE" position. This starts |
|
|
|
| the automatic icemaking process. | Fig. 3 |
| |
11) | Close the door. |
| ||
|
|
| ||
|
|
| ||
12) | Place the front panel in its correct position. |
|
|
|
13
