Installation Instructions

Ensure that the electricity supply is turned off before installing your appliance.

IMPORTANT

DO NOT LIFT OVEN BY THE DOOR HANDLES.

This equipment is designed specifically for domestic purposes and Hotpoint Limited cannot accept responsibility if used for any other type of application.

All electrical installations must be carried out by a NICEIC registered installer.

WARNING: THIS APPLIANCE

MUST BE EARTHED.

1.General

The appliance is designed for mounting at a safe level into an open housing which must be secured to the backing wall.

2.Oven Unit Housing Cabinets

a.The oven unit housing cabinet dimensions must comply with Fig. 4. (See page 7.)

b.An air gap of 50 mm minimum must be provided at the rear of any top or bottom cupboards or shelves. (See Fig. 1 page

6.)

c.Ventilation must be unobstructed, ie. from adjacent cabinetry. This can be done by either raising the base of the cabinets using the adjusting feet (or spacers) or alternatively by providing a slot in the cabinet plinth to the dimensions shown overleaf.

d.The air gap at the rear allows the warmed air to pass out of the inner cabinet space, but where it is intended to fit

cupboards above the oven unit to ceiling height it is essential that the warmed air is exhausted through the front of the cabinet Fig. 1. (See page 6.)

e.If an oven unit is installed adjacent to a tall cabinet, steam escaping from the oven when the door is opened could condense on, and perhaps stain, the adjacent surface. To prevent permanent staining, the adjacent surface should be made of a material that is heat resistant and easy to clean. Adjacent tall cabinets should not be deeper than the oven housing cabinet.

IMPORTANT

It is essential that the lower cupboard is constructed in the manner illustrated see pages 6 and 7 ie. having side, back and roof panels so joined as to provide no apertures which could permit access to the oven unit when installed .

3.Final Installation

a.Using a spirit level, check that the housing cabinet is level from side to side and from front to back in its installed position.

b.Correct any unevenness by placing wooden packing under the bottom of the cabinet. Make sure that the cabinet rests firmly on the cabinet floor without rocking

c.Before the oven is fitted, the cabinet must be firmly secured to the backing wall for stability.

4

Page 4
Image 4
Hotpoint BD62, BD52 manual Installation Instructions, General, Oven Unit Housing Cabinets, Final Installation

BD62, BD52 specifications

Hotpoint BD52 and BD62 are versatile and efficient appliances designed to meet the modern demands of home cooking. With a blend of cutting-edge technology and user-centric features, these models cater to a wide range of culinary needs, making them an essential addition to any kitchen.

Both the BD52 and BD62 models come equipped with a spacious oven capacity, allowing for the preparation of multiple dishes simultaneously. This is particularly useful for families or those who enjoy entertaining guests. The models offer a variety of cooking modes, including fan cooking, conventional baking, and grilling, providing versatility for different cooking preferences.

One standout feature of both models is their Energy Efficiency class, which is designed to reduce energy consumption while still delivering optimal cooking performance. This helps not only in saving on electricity bills but also in minimizing the environmental impact of daily cooking activities. The Hotpoint BD52 and BD62 also incorporate advanced heating technologies that ensure even heat distribution, resulting in perfectly cooked meals every time.

User-friendly interfaces are another attribute of these models. The control panels are designed for easy navigation, equipped with intuitive dials and buttons, making it easier for users to select the desired cooking mode and temperature. Additionally, both appliances include a digital timer and an easy-to-read display, helping to monitor cooking times accurately.

Cleaning is often a hassle when it comes to cooking appliances, but Hotpoint addresses this with self-cleaning options available in both the BD52 and BD62. The pyrolytic cleaning feature allows the oven to self-clean at high temperatures, turning food residues into ash that can be effortlessly wiped away, saving time and effort for users.

Moreover, safety is a priority for Hotpoint. Both models include safety features such as heat-resistant door glass and automatic switch-off features, ensuring peace of mind during operation. The inner oven surfaces also utilize easy-clean materials that help to minimize stains and residues.

In summary, the Hotpoint BD52 and BD62 are thoughtfully designed with a combination of performance, efficiency, and user-friendly features. Their spacious capacities, advanced cooking technologies, and easy-clean functionalities make them ideal choices for anyone looking to enhance their cooking experiences at home. Whether preparing a family meal or experimenting with new recipes, these appliances stand out as reliable companions in the kitchen.