Hotpoint BU62 BU65 manual Something WRONG?, Problem Check

SOMETHING WRONG?

Before calling a Service Engineer, please check through the following lists.

THERE MAY BE NOTHING WRONG.

Problem	Check
Nothing works.	(a) Check
	If you find :-
	Display is blank.
	Then it is likely that there is no electricity supply to your oven.
	Check: (i) That the main cooker wall switch is turned on.
	(ii) Check other appliances to see if you have a power
	cut.
	(iii) Check the main circuit breaker for the property.
Display shows 0.00 AUTO.	The power supply to your oven has possibly been interrupted, but has
	now come back on again. Reset the timer to the correct time of day and
	"Manual" operation using instructions given in the timer section of the
	book.
Main & Top Ovens do not work, but	Check the following to ensure that the timer is in Manual Mode:
the Grill works.	Check that the Auto Symbol is not lit up and is not flashing.
	See timer section for instructions on how to return timer to
	"Manual".
Top Ovens and Grill do not work,	Operating the cooker under the following conditions may cause a safety
but the Main Oven works.	device to operate.
	(a) Grilling with the door closed - always grill with the door open to the
	correct position - see grilling.
	(b) Grilling for an excessively long period at maximum setting - see
	grilling guide.
	(c) Grilling with inadequate ventilation in the cabinet - see installation
	instructions.
Grill does not work.	Check that you have selected :- "Grill" function on the "Top/Oven Grill
	Select" knob (B) and a Grill setting on the "Grill" knob (A) - see grilling
	page.
Grill keeps turning on and off.	When the "Grill" control (A) is operating at less than "6", the grill will cycle
	on and off, this is normal and is not a fault.
Can not set an “Auto Cook” pro-	Remember: "Cook Period" is the actual length of time for which, the
gramme	timer will switch the oven(s) on as part of an "Auto Cooking" programme.
Draught from beneath control	A gentle flow of air will be blown from beneath the control panel when
panel.	the appliance is used. If the appliance is still warm, this cooling fan may
	run on, or restart itself after all of the controls have been turned off.
	The fan will stop once the appliance has been cooled. This is normal and
	not a fault.
Timer buzzer/bleeper operates	Buzzer/Bleeper should stop automatically after 2 minutes. If not,
continually	press minute minder button to silence.

If you have been through the above list and there is still a problem; You should identify your Service

Agent using the list on the back page and contact your Local Service Office.

35