Hotpoint BU62 BU65 manual To Clean the Inside of Outer and Inner Glass Panels

CARE AND CLEANING

TO CLEAN THE INSIDE OF OUTER AND INNER GLASS PANELS

Warning: Always switch your appliance OFF at the mains supply and allow to cool before cleaning.

Fig. 1 1. Position top or main oven door as shown in fig. 1.

Fig. 2

TWO SCREWS/ WASHERS

Note: The door can be wedged open using a towel between the door and the side trim thus leaving your hands free.

2.Grip inner door panel and handle/outer glass assembly. Remove two screws and fibre washers (put to one side) as shown in fig. 2.

3.Pull handle/outer glass assembly at the top outwards while still holding the inner door panel and unhook handle/outer glass assembly at the bottom by lifting handle/outer glass assembly upwards as shown in fig. 3. Take care not to dislodge rubber grommets in bottom of door.

4.Return the inner door panel to the closed position as shown in fig. 4.

Fig. 3

RUBBER GROMMETS

Fig. 4

		DOOR	Warning: Care must be taken when closing the door inner
	DOOR	OUTER
	FIXING	GLASS &	panel as the door will attempt to snatch shut, without the
	TAG	HANDLE	weight of the handle/outer glass assembly avoid trapping
			your fingers.
			5. The inside of inner and outer door glass can now be
			cleaned using a clean, damp cloth and polished using
			a clean, dry cloth.
			6. Refit the handle/outer glass assembly by opening the
			oven door and hold taking care not to trap your fingers, see
			fig. 3. Hook the handle/outer glass assembly back into the
			rubber grommets at the bottom of the inner door panel,
			see fig. 3.
			Fit the handle/outer glass assembly back in position
			at the top ensuring the fixing tags on the handle/outer
			glass assembly fit inside the door inner panel. While still
DOOR			holding door together, refit the two screws and washers,
INNER			see fig. 2.
PANEL
			Never operate the ovens without the outer glass panels
			correctly refitted.

30