Hotpoint CH 10450 GF S manual Oven timer operation, Automatic cooking, Timer function buttons

Models: CG 10455 GF S CG 40456 GF S CH 10450 GF S

1 24
Download 24 pages 20.73 Kb
Page 9
Image 9
Oven timer operation

Oven timer operation

The oven timer (only ventilated 1stOven) offers you the following features:

1.Time of Day

2.Automatic Cooking

3.Minute Minder

Automatic cooking

The main oven can be controlled automatically.

Guidance on automatic cooking

1.Select foods which will take the same time to cook.

2.Set the oven timer so that the food has just finished or is just about to finish cooking on your return to the oven.

This will ensure the food has not cooled down and does not require reheating before serving.

3.Food should be as cold as possible when it goes into the oven, ideally straight from the refrigerator. Frozen meat and poultry should be thawed thoroughly before it is put in the oven.

4.Warm food should never be placed in the oven if there is to be a delay period. Stews prepared by frying the meat and vegetables should be cooked as soon as possible.

5.Dishes containing left-over cooked poultry or meat, for example Shepherds Pie, should not be cooked automatically if there is to be a delay period.

6.Stews and joints should be cooked by the long slow method, so that the delay period is kept to a minimum.

7.On warm days, to prevent harmful bacterial growth in certain foods (ie poultry, joints, etc) the delayed start should be kept to a minimum.

8.Wine or beer may ferment and cream may curdle during the delay period, so it is best to add these ingredients just before serving.

9.Foods which discolour should be protected by coating in fat or tossing in water to which lemon juice has been added, prior to placing food in the oven.

10.Dishes containing liquid should not be filled too full to prevent boiling over.

11.Food should be well sealed (but not airtight) in a container to prevent the loss of liquid during cooking. Aluminium foil gives a good seal.

12.Ensure food is cooked thoroughly before serving.

CLOCKFACE

The timer incorporates a 24 hour clock.

A

U

Ensure the correct time of day

T

O 0 . 0 0

is always set, before using your

 

cooker.

SYMBOLS

 

0 . 0 0

A ‘bell’ symbol will light up when you

select a Minute Minder Period and

 

 

 

The ‘cookpot’ symbol will light up

 

 

 

 

 

 

0 . 0 0

GB

 

either:-

 

- When the timer is in manual mode, or

 

 

 

 

 

 

- During the actual Cook Period.

 

 

 

 

‘AUTO’ will light up:-

 

 

0 . 0 0

 

A

 

- When the timer is first turned on

 

U

 

T

 

O

it will flash. It will go out when a time

 

of day is set or when the timer is set to manual.

The ‘AUTO’ symbol will flash at the end of an Auto Cooking programme to indicate that the programme has finished.

(When the ‘AUTO’ symbol is flashing, to return the oven to Manual operation, turn the oven controls off, ensure that the correct time of day is set, and press the “Manual” button - The ‘AUTO’ symbol will go out).

Timer function buttons

Automatic cooking Minute Minder Button

Hereyoucansetatimeperiodofupto23hours59minutes,thatwill countdown.Whenitreacheszero,thetimerwillemitanaudibletone. For Example: If you set 20 minutes, the audible tone will occur 20 minutes later.

Auto cooking programme

O 0 . 0 0Cook Period Button

Cook Period is the actual length of time for which, the timer will switch the oven(s) on as part of an “Auto Cooking” programme. (e.g. If you set 2 hours, the food will be cooked for 2 hours).

0 . 0 0End Time Button

The time of day at which you want an “Auto Cooking” programme to end.

For Example: If you set a “Cook Period” for 2 hours, and “End Time” of 11:00. The timer will switch the oven(s) on at 9:00 and turn the oven(s) off at 11:00. You will hear a audible tone at 11:00, to indicate that the Auto Cooking Programme has finished.

Notes:

-When setting an Auto Cooking programme you will need to set the oven control(s) to the required temperature(s) when you set the timer.

-If an Auto Cooking programme has been set the oven(s) will only operate during the pre-programmed time.

Timer function buttonsManual Button

Needs to be pressed to cancel an Auto Cooking programme and return the oven(s) to Manual operation.

“+” and “-” Buttons

Used to adjust the various timer function settings.

Setting the time of day

will remain lit for the period set.

At the end of the Minute Minder Period, the timer will emit an audible

tone and the ‘bell’ symbol will disappear.

U

A 0 . 0 0

T

O

Step 1 Make sure all oven controls are turned Off.

Step 2 Check the electricity supply to the cooker is turned on.

Step 3 When switched on the display will show 0.00 and the Auto symbol, flashing intermittently.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

9

Page 9
Image 9
Hotpoint CH 10450 GF S manual Oven timer operation, Automatic cooking, Timer function buttons, Auto cooking programme