Hotpoint DCL 08 CB manual Disposal of your product, Assembling the sliding rack kit

GB	Disposal of your product
	To minimise the risk of injury to children please dispose
	of your product carefully and safely. Remove all doors
	and lids. Remove the mains cable (where fitted) by
	cutting off flush with the appliance and always ensure
	that no plug is left in a condition where it could be
	connected to the electricity supply.
	To help the environment, Local Authority instructions
	should be followed for the disposal of your product.
	Disposal of old electrical appliances

Assembling the sliding rack kit

To assemble the sliding racks:

	1. Remove the two
	frames, lifting them away
	from the spacers A (see
A	figure).

The European Directive 2002/96/EC on Waste

Electrical and Electronic Equipment (WEEE), requires

that old household electrical appliances must not be

disposed of in the normal unsorted municipal waste

stream. Old appliances must be collected separately

in order to optimise the recovery and recycling of

the materials they contain and reduce the impact on

human health and the environment.

The crossed out „wheeled bin” symbol on the product

reminds you of your obligation, that when you dispose

Left	Right guide
guide rail	rail
B
	C	D
		i
		o re
		f	c
		e	t
				i
		x		on
		tra
			c
				t
				i
				on

2.Choose which shelf to use with the sliding rack. Paying attention to the direction in which the sliding rack is to be extracted, position joint B and then joint C on the frame.

of the appliance it must be separately collected.

Consumers should contact their local authority or

retailer for information concerning the correct disposal

of their old appliance.

D

3.Secure the two frames with the guide rails using the holes provided on the oven walls (see diagram). The holes

for the left frame are situated at the top, while the holes for the right frame are at the bottom.

4. Finally, fit the frames on the spacers A.

!Do not place the sliding racks in position 5.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

38