7. During cooking it is always possible to:
GB
- change the temperature by pressing the | button, |
followed by the + and - buttons (manual modes only);
-set the duration of a cooking mode (see Cooking Modes);
-press the 
button to stop cooking. In this case the appliance stores the temperature modified previously in its memory (manual modes only);
-switch off the oven by pressing the 
button for 3 seconds.
8. If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking mode from the point at which it was interrupted, provided that the temperature has not dropped below a certain level. Programmed cooking modes which have not yet started will not be restored and must be reprogrammed (for example: a cooking mode has been programmed to start at 20:30. At 19:30 a blackout occurs. When the power supply is restored, the mode will have to be reprogrammed).
!There is no preheating stage for the GRILL mode.
!Never put objects directly on the bottom of the oven; this will prevent the enamel coating from being damaged.
!Always place cookware on the rack(s) provided.
Cooling ventilation
In order to cool down the external temperature of the oven, a cooling fan blows a stream of air between the control panel and the oven door, as well as towards the bottom of the oven door.
!Once cooking has been completed, the cooling fan continues to operate until the oven has cooled down sufficiently.
Oven light
The light comes on when the oven door is opened or when a cooking mode starts.
The 
button can be used to switch ons/witch off the light at any time.
! Do not use the oven lamp as/for ambient lighting
Residual heat indicators
The appliance is fitted with a residual heat indicator. When the oven is off, the “residual heat” bar on the display lights up to indicate high temperatures inside the oven cavity. The individual segments of the bar switch off one by one as the temperature inside the oven falls.
Demo mode
The oven can operate in the DEMO mode: all heating elements are deactivated, and the controls remain operative.
To activate DEMO mode, switch oven on at power
button 
, then buttons + and - simultaneously for
6 seconds, and then press and release button 
. A buzzer sounds and the TEMPERATURE display shows “dEon”.
To deactivate DEMO mode, when the oven is off press
and hold button 
and button - simultaneously for
3 seconds. A buzzer sounds and the “dEoF” message disappears from the display.
Restoring the factory settings
The oven factory settings can be restored to reset all selections made by the user (clock and customised durations). To carry out a reset, switch off the oven, then press and hold the button corresponding to
the first manual cooking mode (top left) and the 
button simultaneously for 6 seconds. Once the restore procedure is complete, a buzzer will sound. The first
time the 
button is pressed, the oven will behave as if it is being switched on for the first time.
Standby
This product complies with the requirements of the latest European Directive on the limitation of power consumption of the standby mode. If no buttons are pressed for 30 minutes and the control panel lock has not been activated, the appliance automatically reverts to standby mode. Standby mode is indicated by the high luminosity “Clock button” light. As soon as interaction with the machine resumes, the system’s operating mode is restored.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
10
