Care and Cleaning

CLEANING THE DOORS

GB Take particular care not to damage the inner surface of the door inner glass that is coated with a heat reflective layer. Do not use scouring pads, or abrasive powder, which will scratch the glass. Ensure that the glass panel is not subjected to any sharp mechanical blows.

Stubborn stains can be removed by using a fine steel wool soap pad. For slight soiling the inner glass panel may be cleaned, while still warm, without removing it from the door. After cleaning, rinse and dry with a soft cloth.

DROP DOWN DOORS

Remove the door inner glass as follows.

NEVER OPERATE THE COOKER WITHOUT THE INNER DOOR GLASS IN POSITION.

Refit the door inner glass as follows.

1.Open the door fully.

2.Locate the inner door glass into its slots.

3.Carefully slide the glass into its slots as far as it will go and replace the top filler cap as well as the tapping plates

4.Ensure the tapping plates are correctly fitted, as theycan easily fall out and get mislaid.

Remove screws from both side of door

Gently ease the top trim away from door

Gently ease glass upwards and remove from door

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

24

Page 24
Image 24
Hotpoint DX 1032 CX S manual Remove the door inner glass as follows, Refit the door inner glass as follows