Hotpoint EH10 manual Care and Cleaning

Care and Cleaning

Warning	Turn off the main switch before cleaning. Before switching on
	again, ensure that all controls are in the off position.
	Never use biological washing powder, harsh abrasives,
	scouring pads, aerosol cleaners or oven chemical cleaners of
	any kind.
Control panel	Wipe over the control panel with a damp cloth and polish with a dry
	cloth. Do not use oven cleaners or aerosols, scouring pads or
	abrasive powder for cleaning the glass or plastic knobs as damage
	will occur.
Vitreous Enamel	Lift out the hotplate bezels and wash in hot soapy or detergent
Hob Surround	water. Clean hob surround with a cloth wrung out in soapy
	water. Stubborn stains can be removed with a cream, paste or
	liquid cleaner, or by gently rubbing with liberally soaped, very
	fine steel wool pads. Check that the cleaning agent used is
	approved by the Vitreous Enamel Development Council.
Spillage	Raise the hob and secure in this position with the stay provided
Compartment	Clean with a cloth wrung out in soapy water. Stubborn stains can
	be removed with a cream, paste or liquid cleaner, or by gently
	rubbing with liberally soaped, very fine steel wool pads. Check
	that the cleaning agent used is approved by the Vitreous
	Enamel Development Council.
Oven and Grill	Wipe over the door outer panels with a cloth wrung out in hot
Doors	soapy water, then after wiping with a cloth wrung out in clear
	water, dry with a soft clean cloth. Do not use scouring pads or
	abrasive powder which may scratch the surface. Clean the door
	inner panels with a cloth wrung out in soapy water. Stubborn
	stains can be removed with a cream, paste or liquid cleaner, or by
	gently rubbing with liberally soaped, very fine steel wool pads.
	Check that the cleaning agent used is approved by the
	Vitreous Enamel Development Council.

16