Hotpoint GBD641EIX, GB750X Installation, Positioning, Hook fastening diagram, Front, Ventilation

Models: GX641RX GX751RTX GA630RTX GA750TX GA641X GA640.1RX GA750X GBD641EIX GA761RFX GB640.1RX GB641X GB750X GB630RTX

1 16
Download 16 pages 43.7 Kb
Page 5
Image 5
Installation

Installation

!Before operating your new appliance please read this instruction booklet carefully. It contains important information for safe use, installation and care of the appliance.

!Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.

 

600mm min.

650mmmin.

420mmmin.

If the hob is installed beneath a wall cabinet, GB the latter must be situated at a minimum of

700 mm above the hob.

Positioning

!Keep packaging material out of the reach of children. It can become a choking or suffocation hazard (see Precautions and tips).

!The appliance must be installed by a qualified professional according to the instructions provided. Incorrect installation may cause harm to people and animals or may damage property.

!This unit may be installed and used only in permanently ventilated rooms in accordance with current national regulations. The following requirements must be observed:

• The room must be equipped with an air extraction system that expels any combustion fumes. This may consist of a hood or an electric fan that automatically starts each time the appliance is switched on.

The installation cavity should have the dimensions indicated in the figure.

Fastening hooks are provided, allowing you to fasten the hob to tops that are between 20 and 40 mm thick. To ensure the hob is securely fastened

to the top, we recommend you use all the hooks provided.

55mm

475 mm

555 mm

Before fastening the cooktop in place, position the seal (supplied) along the perimeter of the countertop, as shown in the figure.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In a chimney stack or branched flue.

Directly to

(exclusively for cooking appliances)

the Outside

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The room must also allow proper air circulation, as air is needed for combustion to occur normally. The flow of air must not be less than 2 m3/h per kW of installed power.

Hook fastening diagram

A

Examples of ventilation holes for comburant air.

Adjacent

Room to be

Room

Vented

Enlarging the ventilation slot

between window and floor.

The air circulation system may take air directly from the outside by means of a pipe with an inner cross section of at least 100 cm2; the opening must not be vulnerable to any type of blockages.

The system can also provide the air needed for combustion indirectly, i.e. from adjacent rooms fitted with air circulation tubes as described above. However, these rooms must not be communal rooms, bedrooms or rooms that may present a fire hazard.

Hooking position for top H=20mm Hooking position for top H=30mm

Front

Hooking position for top H=40mm Back

Fitting the appliance

The following precautions must be taken when installing the hob:

Kitchen cabinets adjacent to the appliance and taller than the top of the hob must be at least 600 mm from the edge of the hob.

Hoods must be installed according to their relative installation instruction manuals and at a minimum distance of 650 mm from the hob (see figure).

Place the wall cabinets adjacent to the hood at a minimum height of 420 mm from the hob (see figure).

!Use the hooks contained in the “accessory pack”.

Where the hob is not installed over a built-in oven, a wooden panel must be installed as insulation. This must be placed at a minimum distance of 20 mm from the lower part of the hob.

Ventilation

To ensure adequate ventilation, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

5

Page 5
Image 5
Hotpoint GBD641EIX, GB630RTX Installation, Positioning, Hook fastening diagram, Front, Fitting the appliance, Ventilation