Hotpoint GB 750 X Start-upand use, Gas burners, Discrete flame adjustment, The double-flameburner

Start-up and use

!The position of the corresponding gas burner or

GB	electric hotplate* is shown on every knob.
	Gas cooker hobs are equipped with discrete power
	adjustment that allows for accurately adjusting the
	flame to 5 different power levels. Thanks to this
	system, gas hobs are also capable of guaranteeing
	the same cooking results for each recipe, as the
	optimal power level for the desired type of cooking
	can be identified in an easier, more accurate way.
	Gas burners
	Each burner can be adjusted to one of the following
	settings using the corresponding control knob:
	•	Off
		Maximum
		Minimum
	To light one of the burners, hold a lit match or lighter
	near the burner and, at the same time, press down
	and turn the corresponding knob anti-clockwise to the
	maximum setting.
	Since the burner is fitted with a safety device, the
	knob should be pressed for approximately 2-3
	seconds to allow the automatic device keeping the
	flame alight to heat up.
	When using models with an ignition button, light the
	desired burner pressing down the corresponding
	knob as far as possible and turning it anticlockwise
	towards the maximum setting.
	! If a flame is accidentally extinguished, turn off the
	control knob and wait for at least 1 minute before
	trying to relight it.
	To switch off the burner, turn the knob in a clockwise
	direction until it stops (when reaches the “•” position).
	Discrete flame adjustment
	The selected burner can be adjusted - by means of
	the knob - to 5 different power levels.
	To shift between levels, simply turn the knob
	towards the desired power level.
	A click signals the passage from one power level to
	the other.
			The selected power level is
			indicated by the
			corresponding symbol
				) and, on
			(symbols
			hobs equipped with a
			display, by the LEDs that turn

on (5 = max. power; 1 = min. power). The system guarantees accurate flame adjustment and uniform cooking results by facilitating selection of the desired power level.

The "double-flame" burner

This gas burner consists of two concentric flame rings that can operate jointly or independently (in case of dual-control only).

As the burner is fitted with a safety device, the knob should be pressed down for approximately 2-3 seconds until the device keeping the flame automatically alight heats up.

Dual control:

Each ring comprising the burner has its own control

knob:
The knob marked with the symbol	controls the
outer ring.
The knob marked with the symbol	controls the
inner ring.

To activate any one of the two rings, press the corresponding knob and turn it anti-clockwise to the

maximum power setting .

In order to use the double-flame burner to its full potential, avoid simultaneously setting the inner ring to minimum power and the outer ring to maximum power.

Single control:

The rings comprising the burner are activated through a single control knob.

To simultaneously turn on both rings, position the

knob on the symbol (max.) - (min.) then press and turn the knob anti-clockwise.

To turn on the inner ring only, position the knob on

the symbol (max.) - (min.) then press and turn the knob clockwise.

(to switch modes, it is necessary to switch off the burner).

To switch off the burner, press and turn the knob clockwise until it stops (when it reaches the "•" position).

*Only available on certain models.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

10