Using the surface units. | ge.com |
Throughout this manual, features and appearance may vary from your model.
Safety
Be sure you turn the control knob to OFF when you finish cooking.
How to Set
Push the knob in and turn in either direction to the setting you want.
At both OFF and HI the control clicks into position. You may hear slight clicking sounds during cooking, indicating the control is keeping the power level you set.
Indicator Lights (on radiant glass models only)
A HOT SURFACE or HOT COOKTOP (depending on model) indicator light will glow when any radiant element is turned on and will remain on until the surface is cool enough to touch.
A SURFACE UNIT on or BURNER ON (depending on model) indicator light will glow when any surface unit is on.
NOTE: The SURFACE UNIT on indicator light may glow between the surface control settings of LO and OFF, but there is no power to the surface units.
Instructions
Instructions | Operating |
Installation
Care and CleaningTroubleshooting Tips
Instructions
7
Consumer Support
