Hotpoint JBS07 Before You Begin, For Your Safety, Anti-Tipdevice, Completion time - 1 to 3 hours

Models: RB800 RB787 RB740 RB540 RB790 JBP22 JBP15 JBP21 JB600 JBS15 JBP27 JBS03 JBP60 JBS07 JBS27 JBS56

1 52
Download 52 pages 27.06 Kb
Page 34
Image 34
Installation Instructions

Installation Instructions

Free-Standing Electric Ranges

Free-Standing Electric RangesQuestions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com

BEFORE YOU BEGIN

Read these instructions completely and carefully.

IMPORTANT Save these

instructions for local inspector’s use.

IMPORTANT Observe all governing codes and ordinances.

Note to Installer – Be sure to leave these instructions with the Consumer.

Note to Consumer – Keep these instructions for future reference.

Skill level – Installation of this appliance requires basic mechanical skills.

Completion time – 1 to 3 hours

Proper installation is the responsibility of the installer.

Product failure due to improper installation is not covered under the Warranty.

BEFORE YOU BEGINWARNING This appliance must be properly grounded.

FOR YOUR SAFETY:

Read these instructions completely and carefully.WARNING Before beginning the installation, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

FOR YOUR SAFETY:

All rough-in and spacing dimensions must be met for safe use of your range. Electricity to the range can be disconnected at the outlet without moving the range if the outlet is in the preferred location (remove lower drawer).

To reduce the risk of burns or fire when reaching over hot surface elements, cabinet storage space above the cooktop should be avoided. If cabinet storage space is to be provided above the cooktop, the risk can be reduced by installing a range hood that sticks out at least 5” beyond the front of the cabinets. Cabinets installed above a cooktop must be no deeper than 13”.

Be sure your appliance is properly installed and grounded by a qualified technician.

Make sure the cabinets and wall coverings around the range can withstand the temperatures (up to 200°F) generated by the range.

ANTI-TIP DEVICE

•IMPORTANT — Save theseWARNING To reduce the risk of tipping, the appliance must be secured by properly installed Anti-Tip bracket packed with this appliance.

If the Anti-Tip device supplied with the range does not fit this application, use the universal Anti-Tip device WB2X7909.

•Completion time – 1 to 3 hoursWARNING

• All ranges can tip

Injury to persons could result

Install Anti-Tip bracket packed

with range

• See Installation Instructions

If you pull the range out and away from the wall for any reason, make sure the Anti-Tip bracket is engaged when the range is pushed back against the wall.

34

Page 34
Image 34
Hotpoint JBS07, JBS56 Before You Begin, For Your Safety, Anti-Tipdevice, Read these instructions completely and carefully