Introduction
Glass door panels
To meet the relevant Standards of Domestic cooking appliances, all the glass panels on this appliance are toughened to meet the fragmentation requirements of BS3193. This ensures that, in the unlikely event that a panel breaks, it does so into small fragments to minimise the risk of injury.
Please take care when handling, using or cleaning all glass panels as any damage to the surfaces or edges may result in the glass breaking without warning or apparent cause at a later date. Should any glass panel be damaged, we strongly recommend that it is replaced immediately.
Before using the appliance for the first time, remove any protective polythene film and wash the oven shelves in hot soapy water to remove their protective covering of oil. Even so, when you first switch on the oven or grill you may notice a smell and some smoke.
Condensation
When hot and cold air meet, condensation forms. The outer door is air cooled and the inner door gets hot, so some condensation might form; this is normal and will disappear within 10 - 15 minutes.
To replace a light bulb (if fitted)
Caution: Switch off the electricity supply to the appliance, to avoid the possibility of electric shock.
Wait until the oven is cool, then remove the shelves.
Unscrew the lens cover (turn anticlockwise). Unscrew the bulb and replace. Replace lens cover.
Please note that light bulbs are not covered by guarantee.
Environmental Protection
We are committed to protecting the environment and operate an Environmental Management System which complies with BS EN ISO 14001:1996.
Disposal of packaging
•All our packaging materials are recyclable and environmentally friendly.
•Please help us to protect our environment by disposing of all packaging in an environmentally friendly manner.
•Please contact your local authority for the nearest recycling centre.
Caution: Packaging materials can pose a risk of suffocation - keep away from children.
4
