If Something Goes Wrong?

Before calling a Service Engineer, please check through the following lists.THERE MAY BE NOTHING WRONG.

If having been through the list there is still a problem, contact Service (see Key Contacts, back page).

Problem

Check

 

 

 

Slight odour or small amount of smoke

This is normal and should cease after a short period.

when grill / oven used first time.

 

 

 

 

Nothing works.

If you find that the timer display is blank, then it is likely that

 

there is no electricity supply to your oven. Check:

 

(i) That the main cooker wall is switched on

 

(ii) Other appliances, to see if you have had a power cut

 

(iii) The main circuit breaker for the property

 

 

 

Timer display shows 0.00 with AUTO

The power supply to your oven has possibly been interrupted, but

flashing.

has now come back on again. Reset the timer to the correct time of

 

day and “Manual” operation using instructions given in the timer

 

section of the book.

 

 

 

Main Oven and and Top Oven do not

Your timer may be set for an Auto Cooking programme:

work, but the Grill works.

Check the timer to see whether "Auto" is lit or flashing. If it is then

 

please follow the instructions given in the Timer section of this book

 

to return the timer to Manual operation.

 

 

 

Top Oven and Grill do not work, but

Operating the cooker under the following conditions may cause a

the Main Oven works.

safety device to operate:

 

(a) Grilling with the door closed - Always grill with the door fully open

 

(b) Grilling for an excessively long period at maximum setting - see

 

Grilling guide.

 

Switch off appliance and allow to cool for approx 30 mins. Switch the

 

cooker back on and check that the Grill / Top oven is now operating.

 

 

Grill does not work.

Ensure that the Top Oven control is in the OFF (O) position.

 

 

Grill keeps turning on and off.

When the Grill control is operating at less than its maximum setting,

 

the Grill will cycle on and off, this is normal and not a fault.

 

 

Draught from beneath control panel.

A gentle flow of air will be blown from beneath the control panel when

 

the appliance is used. If the appliance is still warm, this cooling fan may

 

run on, or restart itself after all of the controls have been turned off.

 

The fan will stop once the appliance has been cooled. This is normal

 

and not a fault.

 

 

 

Timer buzzer/audible tone operates

To cancel the audible tone, press the minute minder button.

continually

 

 

 

 

Grilling is uneven

Ensure that Grill pan has been positioned as stated in the Grilling

 

section of this book.

 

 

Oven does not cook evenly

Check:

 

(a) Temperature and shelf positions are as recommended in the Oven

 

Temperature Charts.

 

(b) Oven utensils being used allow sufficient air flow around them.

 

 

Oven temperatures too high or low

Check temperature and shelf positions are as recommended in the

 

Oven Temperature Charts.

 

It may be necessary to increase or decrease the recommended

 

temperature slightly to suit your taste.

Oven lamp does not work

The oven lamp is not covered by the guarantee.

 

The part is easily changed (see section on oven lamp replacement).

 

A new lamp may be obtained from our Parts department (see Key

 

Contacts, back page).

 

 

Condensation on the wall at the rear

Steam and / or condensation may appear from the vent at the rear of

of the cooker.

the appliance when using an oven particularly for foods with a high

 

water content e.g. frozen chips, roast chicken etc. This is normal, and

 

any excess should be wiped off.

 

 

Steam / Condensation in the oven

Steam is a by - product of cooking any food with a high water contact.

after use.

To help minimise always:

 

a) Try to avoid leaving food in the oven to cool after being cooked.

 

b) Use a covered container, wherever possible.

41

Page 42
Image 42
Hotpoint S150E manual If Something Goes Wrong?, Problem Check