STEP 7 |
|
|
| A Typical Wash Programme |
|
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
|
| 2 |
|
|
|
| 3 |
|
|
|
| 4 |
|
| 5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sort laundry into | Add detergent (and | Press the ‘On/Off‘ | Select any optional | (Models: |
groups by washcare | fabric conditioner if | button. | wash feature(s) that | WF445,WF440,WF430, |
labels. | required) to the | Turn the programme | you may require by | WF240,WF215 and |
Load the machine, | dispenser drawer (see | selector dial to the | pressing the | WF210 only): |
making sure that the | STEP 3). | programme required | appropriate button(s), | Reduce the spin |
laundry is not | Refer to the detergent | (see STEP 4). | indicator lights will | speed if you wish by |
trapped in the door. | manufacturer’s |
| show what you have | turning the variable |
Close the door by | dosage instructions. |
| chosen (see STEP 6). | spin speed control |
pushing it until it |
|
|
| dial (see STEP 6). |
clicks. |
|
|
|
|
6
(Models:
WF445,WF440,WF430, WF250,WF225 and WF220 only):
Reduce the wash temperature if you wish by turning the variable temperature control dial (see STEP 6).
7
When all selections have been made press the ‘Start/Cancel’ button.
To stop a programme before it has finished: press the ‘Start/Cancel’ button again.
Turn the programme selection dial to ‘Pump Out’.
When the machine has finished emptying you can select a new programme.
Press the ‘Start/Cancel’ button to start the new programme.
8
During the wash, the progress indicator lights will show what stage in the cycle the programme has reached.
9
A short time after the programme has finished the ‘Door Locked’ indicator light will go out and you can open the door.
We recommend that you switch off the electricity and water supply.
Automatic Features...
Auto half load
Auto half load saves you time and money when washing smaller loads.
Water levels are automatically adjusted to cater for the different loads.
Unbalanced load
Your machine has an inbuilt feature to prevent it spinning with an unbalanced load. This will minimise excessive vibration and prolong the life of the machine. Before each spin the machine ‘senses’ the load within the drum and if the machine considers the load to be unbalanced, it will not automatically spin. Instead the machine will try to redistribute the load to achieve balance by tumbling backwards and forwards. If it is unable to balance the load after the sixth attempt the machine will abort the spin process.
If this safety feature is encountered you can spin the load after first opening the door, redistributing the load and selecting a fast or slow, spin only programme. In the case of small loads or single items you may try adding some extra items of a comparable size to help balance the load.
