B&B Electronics Mini POE Ethernet to RS--232 Converters Getting Started, Set up the Hardware

Models: PESV1A Mini POE Ethernet to RS--232 Converters PES1A

1 31
Download 31 pages 34.64 Kb
Page 11
Image 11

Getting Started

Chapter 3: Getting Started

1.Check the contents of your PES1A/PESV1A package. It should contain…

‰The PES1A or PESV1A module

‰A printed version of this user manual

‰A printed version of the PES1A/PESV1A Quick Start Guide

‰CD-ROM disc with discovery software, RealPort software, this manual, Quick Start guide

2.Set up the Hardware

‰Connect your PC to the network

‰Connect the PES1A/PESV1A serial port to your serial device (Use a serial cable if it is DCE, null modem cable if it is DTE.)

‰Connect the PES1A/PESV1A Ethernet connector to a PoE-enabled network switch or hub (CAT-5 cable)

3.Power it Up

‰Power is applied when the Ethernet (PoE) cable is connected

‰When a connection is established with the network the yellow LED will illuminate

‰The PES1A/PESV1A will automatically try to obtain an IP address, or generate one itself

4.Get the IP Address

‰Use the discovery software on your CD (finder.exe) to get the IP address for your PES1A/PESV1A

5.Login

‰In a web browser on your PC, type in the IP address and access the Web Configuration and Management Interface

‰Login using the username ‘root’ and password ‘dbps’

Manual Documentation Number: PES1A/PESV1A-4905m

11

Getting Started

6.Configure the PES1A/PESV1A

‰In the Configuration, Serial Ports page select the Port Profile you require for use with your application (E.g. RealPort for virtual COM port, TCP Server, UDP server, Serial Bridge, etc)

‰Configure the serial port settings for the selected Port Profile (E.g. In TCP Sockets select client or server, TCP port numbers, etc.) Also configure baud rate, data bits, etc in Basic Serial Settings.

‰Configure any required alarms and notification

‰If RealPort profile was selected (virtual COM port) do the next step (Set up VCOM)

7.Set up VCOM (if using the RealPort profile)

‰Start the RealPort software wizard (located on the included CD)

‰Select Add a New Device

‰Select your PES1A/PESV1A from the list

‰Select an unused COM port number

‰Follow the wizard to set up a virtual COM port

8.Communicate

‰Configure and then start your application

12

Manual Documentation Number: PES1A/PESV1A-4905m

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104www.bb-elec.com

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104www.bb-elec.com

B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445www.bb-europe.com

B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445www.bb-europe.com

Page 11
Image 11
B&B Electronics Mini POE Ethernet to RS--232 Converters, PESV1A, PES1A manual Getting Started, Set up the Hardware