Using the Web Configuration and Management Interface
Figure 14. TCP Client Settings
Consult the Tutorial and online Help for more detail.
UDP Sockets
Select UDP Sockets to implement Direct IP Mode using UDP protocol. When using UDP Sockets your converter can be configured as a UDP server or UDP client.
UDP Server Settings
If your PES1A/PESV1A is configured as a UDP server, other network devices can initiate a UDP connection with the serial device connected to the PES1A/PESV1A serial port. Network devices initiating connections must be configured with the IP address of the PES1A/PESV1A and the UDP port number associated with its serial port.
After selecting UDP Sockets, click Apply to return to the Serial Port Configuration page. Select the TCP Server Settings as required by your application.
Manual Documentation Number: | 21 |
Using the Web Configuration and Management Interface
Figure 15. UDP Server Settings
UDP Client Settings
If your PES1A/PESV1A is configured as a UDP client you can automatically distribute serial data from you PES1A/PESV1A to many devices at the same time. This is sometimes referred to as Data Distribution or UDP Multicast.
Figure 16. UDP Client Settings
You can configure multiple destinations. In the appropriate boxes, type the Description, Send To IP address or DNS name and UDP Port number, then click Add. You can also configure the conditions under which to send data.
Consult the Tutorial and online Help for more detail.
22 | Manual Documentation Number: |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph | B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph |
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 | B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 |
