Remove the power button board:
1.Remove the rubber pad (1) that protects the power button board cable ZIF connector.
2.Release the ZIF connector (2) to which the power button board cable is attached, and then disconnect the power button board cable from the system board.
3.Detach the power button board (3) from the display panel assembly. (The power button board is attached to the display panel assembly with
4.Remove the power button board and cable.
Reverse this procedure to install the power button board and cable.
Volume button board
Description | Spare part number |
|
|
Volume button board (includes cable, | |
|
|
Before removing the volume button board, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
HP Slate10 HD | 23 |
