4.Remove the card reader board (4).
Reverse this procedure to install the card reader board.
Speakers
Description | Spare part number |
|
|
Speaker Kit (includes left and right speakers and cables) | |
|
|
Before removing the speakers, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 18).
5.Disconnect the battery cable from the system board (see Battery on page 20).
Remove the speakers:
1.Disconnect the speaker cables (1) from the system board.
2.Release the speaker cables from the retention clips (2) and channels built into the display panel assembly.
HP Slate10 HD | 29 |
