Reverse this procedure to install the audio board.
Card reader board
Description | Spare part number |
|
|
Card reader board (includes cable, micro SIM slot, and micro SD Card Reader slot) | |
|
|
Before removing the card reader board, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 18).
5.Disconnect the battery cable from the system board (see Battery on page 20).
Remove the audio board:
1.Release the ZIF connector (1) to which the card reader board cable is attached, and then disconnect the card reader board cable from the audio board.
2.Release the ZIF connector (2) to which the card reader board cable is attached, and then disconnect the card reader board cable from the system board.
3.Remove the two Phillips PM2.0×2.75 screws (3) that secure the card reader board to the display panel assembly.
28 | Chapter 5 Removal and replacement procedures |