3.Release the tape (2) that secures the TouchScreen cable to the battery.
4.Release the speaker cables from the retention clips (3) built into the battery.
5.Remove the three Phillips PM2.0×2.75 screws (4) that secure the battery to the display panel assembly.
6.Remove the battery (5).
Reverse this procedure to install the battery.
Rear-facing webcamera
Description | Spare part number |
|
|
|
|
Before removing the
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
HP Slate7 HD | 39 |
