HP 110c-1001NR Mass storage devices, Description Spare part number Hard drive select models only

Mass storage devices

NOTE: Each hard drive spare part kit and solid-state drive spare part kit includes a cable and bracket.

Description	Spare part number
Hard drive (select models only)
250-GB, 5400-RPM	537635-001
160-GB, 5400-RPM	537634-001
Hard Drive Hardware Kit	537641-001
Solid-state drive
64-GB	537640-001
32-GB	537639-001
16-GB	537638-001
8-GB	537637-001
Solid–state Drive Hardware Kit	537642-001

Before removing the hard drive or solid-state drive, follow these steps:

1.Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the device.

3.Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device.

4.Remove the battery (see Battery on page 36).

5.If your device has WWAN capability, remove the SIM (see SIM on page 37.

6.Remove the keyboard (see Keyboard on page 40).

To remove the mass storage assembly:

1.Loosen the Phillips SP2.5×10.0 captive screw (1), and remove the two Phillips PM2.0×5.0 screws (2) that secure the assembly to the device.

Component replacement procedures 45