ANSWERING SYSTEM OPERATION AT THE BASE
Audible Indicators
This system gives you voice prompts for feature operations and voice confirmations when you press a button or complete an operation.
Turn Answering System On or Off
Press 
to turn the system on or off.
The message window will show the number of messages at all times.
When the system is turned on, you will hear
“Machine on” and the 
light will be lit.
When the system is off, you will hear “Machine off”
and the 
light will not be lit. The system will still answer after 10 rings if it is off, then announce “Please enter your remote access code” and wait for you to enter the code to access remote functions. (See REMOTE ACCESS beginning on page 38 for details.)
Set the Clock
This system comes preset to Monday, 12:00 AM and 
will flash in the message window. You will need to set the correct day and time at the base.
1With answering system on,press 
the system will announce the current setting
then “To change clock press 
.” Press 
.
2 Press 
until the system announces the
correct day, then press 
. The system announces the current hour setting.
3 Press 
until the system announces
the correct hour, press 
. The system announces the current minute setting.
4Press 
to advance the minutes one at a time
— OR —
Press and hold 
to advance 10 minutes at a time. When the system announces the
correct minutes,press 
. The system announces the current clock setting.
¥NOTE: Press a MBOX/STOP button to exit programming at any time.
28