TELEPHONE OPERATION
PROBLEM
If the system does not answer after the correct number of rings:
SOLUTION
•Make sure that the answering system is on.
•If Toll Saver is on,the number of rings changes to two when you have new messages waiting.
•In some cases,the system may be affected by the ringing system used by the local telephone company.
•If the memory is full or the system is off, the system answers after 10 rings.
PROBLEMSOLUTION
If CL appears in the Messages Window:
You need to reset the clock.
PROBLEM
If the system does not respond to commands from a remote touch tone phone:
SOLUTION
•Make sure you are calling from a touch tone phone. When you dial a number, you should hear tones. If you hear clicks
instead,the phone is not a touch tone telephone.
•Make sure you enter your Remote Access Code correctly.
•There may be noise or interference on the phone line you are using. Press keys firmly.
PROBLEM | SOLUTION |
If your outgoing | • When you record your announcement, |
announcement isn’t | make sure you speak in a normal tone of |
clear: | voice, about nine inches from the base. |
| • Make sure there is no “background”noise |
| (TV, music,etc.) while you are recording. |
|
|
45