Printed page is different than what appeared on screen
Choose the item that best describes the problem:
●Garbled, incorrect, or incomplete text
●Missing graphics or text, or blank pages
●Page format is different than on another printer
Printed page problems
Problem | Solution |
|
|
Garbled, incorrect, or | The parallel or USB cable might be loose or defective. Try the |
incomplete text | following: |
| ● Disconnect the cable and reconnect it at both ends. |
| ● Try printing a job that you know works. |
| ● If possible, attach the cable and printer to another |
| computer, and try printing a job that you know works. |
| ● Try using a new |
| cable. See Ordering supplies and accessories. |
| The wrong printer driver might have been selected when the |
| software was installed. Make sure that the HP LaserJet 1150 |
| or HP LaserJet 1300 is selected in the printer properties. |
| There might be a problem with your software application. Try |
| printing from another software application. |
Missing graphics or text, or blank pages
●Make sure that your file does not contain blank pages.
●The sealing tape might still be in the print cartridge. Remove the print cartridge, and pull out the sealing tape. Reinstall the print cartridge. See Changing the print cartridge for instructions. To check the printer, print a demo page by pressing the Go button.
●The graphic settings in the printer properties might not be correct for the type of job that you are printing. Try a different graphic setting in the printer properties. See Printer properties (driver) for more information.
●The printer driver might not work for the type of job that you are printing. Try using a different printer driver (software), such as the printer driver for the
HP LaserJet III.
Note
If you use a different printer driver, you will lose access to some product features.
82 Chapter 6 | ENWW |