Using the ProCurve Web Browser Interface

 

Navigating the Web Browser Interface

 

 

N o t e

To ensure proper screen refresh, be sure that Internet Explorer is configured

 

as follows: Under the menu “Tools / Internet Options / General / Temporary

 

Internet Files / Settings,” the setting for item “Check for newer versions of

 

stored pages” should be “Every visit to the page”.

 

Panel Display

 

 

The Web agent displays an image of the switch’s ports. The port will turn green

 

when the corresponding front-panel port is in connection with another device.

 

To show the port number, place mouse pointer onto the intended port.

Main Menu

Using the onboard Web agent, you can define system parameters, manage and control the switch, and all its ports, or monitor network conditions. The following table briefly describes the selections available from the Web- browser interface.

Menu

Description

Page

 

 

 

SYSTEM

 

2-5

 

 

 

Information

Provides basic system description, including system

2-5

 

name, IP address, port, trunk, LACP, and VLAN

 

 

information.

 

 

 

 

Name

Sets the name of the switch.

2-8

 

 

 

IP Address

Sets the IP address, subnet mask, and gateway IP

2-8

 

address.

 

 

 

 

Password

Changes the password.

2-10

 

 

 

Rate Limits

Sets the storm control parameters.

2-11

 

 

 

PORTS

 

2-12

 

 

 

Configuration

Configure the speed and duplex mode of ports.

2-12

 

 

 

Port Mirroring

Sets up the port mirroring features of the switch to

2-13

 

enable traffic monitoring.

 

 

 

 

Statistics

Shows statistics for each port on the switch.

2-15

 

 

 

Web ProCurve the Using Interface Browser

2-3