Using the ProCurve Web Browser Interface

Web Configuration

Web Configuration

Displaying System Information

You can display a complete summary of identity, IP Address, port, Trunk/LACP, and VLAN information for the switch.

Field AttributesSystem Identity•System Name – Name assigned to the switch system.•System Location – Description of the switch location.•System Contact – Contact information assigned to the switch.•Number of Ports – Number of built-in ports.•Hardware Version – Hardware version of the main board.•Software Version – Version number of the code.•Serial Number – The serial number of the switch.Address Information

•Management VLAN – ID of the configured VLAN (1-4093, no leading zeroes). By default, all ports on the switch are members of VLAN 1. However, the management station can be attached to a port belonging to any VLAN, as long as that VLAN has been assigned an IP address.

•IP Address – Address of the VLAN to which the management station is attached. (Default: 192.168.2.10)

•Subnet Mask – This mask identifies the host address bits used for routing to specific subnets. (Default: 255.255.255.0)

•Gateway IP Address – IP address of the gateway router between the switch and management stations that exist on other network segments. (Default: 0.0.0.0)

•MAC Address – The physical layer address of the switch.Port Information•Port – Indicates the port number.•Type – Indicates the port type (10/100/1000-T or M).•Link Status – Indicates if the link is Up or Down.

Web ProCurve the Using Interface Browser

2-5