Using the ProCurve Web Browser Interface
Using the ProCurve Web Browser Interface
Web Configuration
•Speed/Duplex Status – Shows the current speed and duplex mode.
–10HDX
–10FDX
–100HDX
–100FDX
–1000FDX
•Flow Control Status – Indicates whether flow control is enabled or disabled.
•
•Frame Type – Either “Tagged” or “All”. “Tagged” means that the port will only send and receive
•PVID – The VLAN ID assigned to untagged frames received on the interface. (Default: 1)
Trunk/LACP Information
•Trunk/LACP – The trunk label. “T1” through “T12” on the 24 port and “T1” through “T4” on the 8 port are used as trunk labels.
•Type – Displays the trunk type as “Static” or “Dynamic”.
•Trunk/LACP Status – Indicates the speed and duplex setting of the trunk.
–10HDX
–10FDX
–100HDX
–100FDX
–1000FDX
•Ports – The ports that are members of the trunk.
VLAN Information
•VLAN ID – A number in the range 1 - 4094 which identifies the VLAN.
•VLAN Member – A list of the ports that are members of the VLAN. By default, all ports are members of VLAN 1.