Using the ProCurve Web Browser Interface

Web Configuration

Trunk Configuration

You can use the Trunk Configuration page to manually set the speed, duplex mode, and flow control.

Modifying Trunk Settings

1. On the Trunks Configuration page, modify any of the following settings:

 

• Speed Duplex – Allows auto-negotiation to be enabled or disabled.

 

When auto-negotiation is disabled, you can force the settings for

 

speed, duplex mode, and flow control.

 

• Flow Control – Allows automatic or manual selection of flow control.

 

2. Click APPLY.

 

 

N o t e

All the ports in the trunk will have the same speed, duplex mode, and flow

 

control as defined by the trunk. Once the trunk is deleted, the ports will no

 

longer be a member of that trunk but will retain the speed, duplex mode, and

 

flow control setting of that trunk.

 

 

Field Attributes

•Trunk – Indicates trunk identification.

•Speed/Duplex – Allows you to manually set the port speed and duplex mode for all ports in the trunk.

•Flow Control – Allows flow control to be enabled or disabled. When the box is checked, flow control is enabled.

•Member Ports – Indicates which ports belong to the trunk.

Web – Click Trunks, Configuration.

Web ProCurve the Using Interface Browser

2-19