Using the ProCurve Web Browser Interface

Web Configuration

• Subnet Mask – This mask identifies the host address bits used for routing to specific subnets. (Default: 255.255.255.0)

• Gateway IP Address – IP address of the gateway router between

 

this device and management stations that exist on other network

 

segments. (Default: 0.0.0.0)

 

• Management VLAN – ID of the configured VLAN (1-4093, no leading

 

zeroes). By default, all ports on the switch are members of VLAN 1.

 

However, the management station can be attached to a port belonging

 

to any VLAN, as long as that VLAN has been assigned an IP address.

 

 

N o t e

Be sure to keep a record of the switch's IP address. If you cannot remember

 

the switch’s IP address, you can restore the original settings by following the

 

procedure described in the “Troubleshooting” section.

 

If you change the switch IP address, you must close the Web interface and

 

start a new session using the new IP address.

 

Web – Click System, IP Address. Enter the IP address, subnet mask, gateway,

 

 

and select the Management VLAN, then click APPLY.

Web ProCurve the Using Interface Browser

2-9