due to a borderline low-battery condition. The calculator can detect that there is insufficient power for printing before the battery annunciator comes on.

If you continue to use the calculator after the battery annunciator comes on, power can eventually drop to a level at which the calculator stops powering the display and keyboard. The calculator will require fresh batteries before it can be turned back on. When you turn the calculator on after fresh batteries have been installed, the calculator displays

017M;<H 2HFH: if your stored data is intact. If data has been lost, the

calculator displays 0H0E2@ 9EF:. In either case, the clock’s time might be incorrect.

Installing Batteries

Once the batteries are removed, you must replace the batteries within 30 seconds to prevent loss of Continuous Memory.

To install batteries:

1.Have two fresh CR2032 batteries at hand. Hold batteries by the edges. Do not touch the contacts. Wipe each battery with a clean, lint-free cloth to remove dirt and oil.

2.Make sure the calculator is off. Do not press Cagain until the entire procedure for changing batteries is completed. Changing batteries with the calculator on can erase the contents of Continuous Memory. If you have set any appointments, make sure they will not come due while the batteries are out.

3.Turn the calculator over and prize off the battery cover.

A: Assistance, Batteries, Memory, and Service 225

File name : 17BII-Plus-Manual-E-PRINT-030709

Print data : 2003/7/11