8.If it is necessary to replace the webcam/microphone module:

a.Remove the Phillips PM2.0×4.0 screw (1) that secures the webcam/microphone module to the display bezel.

b.Release the webcam/microphone module (2) as far as the webcam/microphone module allows.

c.Disconnect the webcam/microphone module cable (3) from the webcam/microphone module.

d.Remove the webcam/microphone module. The webcam/microphone module is available using spare part number 603779-001.

9.If it is necessary to replace the Bluetooth module:

a.Detach the Bluetooth module (1) from the display bezel. (The Bluetooth module is attached to the display bezel using double-sided tape).

ENWW

Component replacement procedures 73