11.If it is necessary to replace the display hinges and hinge covers:

a.Remove the two Phillips PM2.0×4.0 screws (1) that secure the hinge covers to the display bezel.

b.Remove the hinge covers (2).

c.Remove the six Phillips PM2.5×5.0 screws (1) that secure the hinges to the display panel.

d.Remove the four Phillips PM2.0×4.0 screws (2) that secure the hinges to the display panel.

e.Remove the hinges (3). The hinge covers are available using spare part number 604063-001. The hinges are available using spare part number 603778-001.

ENWW

Component replacement procedures 75