12.If it is necessary to replace the wireless antenna cables and transceivers:
a.Release the wireless antenna cables from the clips and routing channel built into the display enclosure.
b.Release the two pieces of tape that secure the wireless antenna cables to the display enclosure.
c.Release the tabs built into the display enclosure that secure the wireless antenna cables.
d.Remove the two Phillips PM2.0×4.0 screws that secure the wireless antenna transceivers to the display enclosure.
e.Remove the wireless antenna cables and transceivers. The wireless antenna cables and transceivers are available in the Wireless Antenna Kit, spare part number
Reverse this procedure to reassemble and install the display assembly.
76 Chapter 4 Removal and replacement procedures | ENWW |