Manuals / HP / Computer Equipment / Point of Sale Systems

HP 2000 Base Model manual About This Book

Models: 2000

1 45

Download 45 pages 22.77 Kb

Page 3

About This Book

About This Book

This guide provides basic information for upgrading this computer model.

WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life.

CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.

NOTE: Text set off in this manner provides important supplemental information.

iii

Image 3

HP 2000 Base Model manual About This Book

Contents

HP RP2 Retail System Hardware Reference GuideSoftware terms Product noticeAbout This Book iv About This Book Table of contents Interpreting POST diagnostic front panel LEDs and audible codesCalibration for Windows 7 Professional and Embedded POSReady Computer operating guidelines and routine care Touch screen maintenancePreventing electrostatic damage Grounding methodsStandard features 1 Product overviewProduct Models 87% energy efficient internal power supply adapter Flexible use with display tilt and height adjustmentsOperating system choices Integrated NIC and WiFi some models Cable management featuresRear components Rear componentspowered serial ports on page 32 for more information Connecting a serial device2 Hardware upgrades Tools neededWarnings and cautions Mounting the RP2 to a wall, swing arm, or pole-mounted bracket Unfolding the stand Adjusting the tilt angleRouting cables to external devices Routing cables to external devices 7. Reconnect the power cord and press the power buttonReplacing the power supply Replacing the power supply 7. Slide the new power supply into the left side of the base12 Chapter 2 Hardware upgrades 11. Connect the power cord to an electrical outletInstalling optional HP integrated USB peripheral modules 14 Chapter 2 Hardware upgrades Installing optional HP integrated USB peripheral modules 16 Chapter 2 Hardware upgrades 8. Reconnect the power cord and press the power buttonInstalling memory DDR3-SDRAM SODIMMReplacing the SODIMM 6. Replace the front panel. See Replacing the front panel on page 3. Remove the front panel. See Removing the front panel on pageRemoving the front panel 20 Chapter 2 Hardware upgrades 4. Rotate the display head back to the horizontal position5. Lift the front panel straight up and off the rear casing Replacing the front panel 1. Place the display head straight down onto the rear casingReplacing the front panel 22 Chapter 2 Hardware upgrades 3. Remove the front panel. See Removing the front panel on page Replacing the hard drive7. Slide the hard drive out of the carrier 24 Chapter 2 Hardware upgrades9. Install the four grommet screws into the sides of the carrier 8. Slide the new hard drive into the carrierReplacing the hard drive 11. Replace the front panel. See Replacing the front panel on page Replacing the battery2. Disconnect the power cord from the power outlet 3. Remove the front panel. See Removing the front panel on page6. Replace the front panel. See Replacing the front panel on page Securing the RP2 to a counter top Cable lock Installing an external security lockA padlock can be used to secure the RP2 to an external object Padlock1. Install the padlock security loop on the rear panel 30 Chapter 2 Hardware upgradesCalibration for Windows 7 Professional and Embedded POSReady 3 Configuring the softwareConfiguring the MSR Touch screen calibrationConfiguring powered serial ports Interpreting POST diagnostic front panel LEDs and audible codes A TroubleshootingPossible Cause Table A-1 Diagnostic Front Panel LEDs and Audible Codes continuedActivity BeepsPossible Cause Table A-1 Diagnostic Front Panel LEDs and Audible Codes continuedActivity BeepsB Electrostatic discharge Preventing electrostatic damageGrounding methods Computer operating guidelines and routine care Touch screen maintenanceShipping preparation Index