3 Power management
Setting power options
Using power-saving states
The computer has two
When Standby is initiated, the power light blinks and the screen clears. Your work is saved to memory. Exiting Standby is faster than exiting Hibernation. If the computer is in Standby for an extended period or if the battery reaches a critical battery level while in Standby, the computer initiates Hibernation.
When Hibernation is initiated, your work is saved to a hibernation file on the hard drive and the computer turns off.
CAUTION: To prevent possible audio and video degradation, loss of audio or video playback functionality, or loss of information, do not initiate Standby or Hibernation while reading from or writing to a disc or an external media card.
NOTE: You cannot initiate any type of networking connection or perform any computer functions while the computer is in Standby or in Hibernation.
Initiating and exiting Standby
The system is set at the factory to initiate Standby after 10 minutes of inactivity when running on battery power and 25 minutes of inactivity when running on external power.
Power settings and timeouts can be changed using Power Options in Windows Control Panel.
With the computer on, you can initiate Standby in any of the following ways:
●Close the display.
●Select Start > Turn Off Computer > Stand By. To exit Standby:
▲Briefly slide the power switch.
When the computer exits Standby, the power light turns on and your work returns to the screen where you stopped working.
NOTE: If you have set a password to be required when the computer exits Standby, you must enter your Windows password before your work will return to the screen.
Setting power options 15
